Temperature Controller

Technical Specifications:
Measuring Range : RTD-PT 100 (0.10C) - -99.9 to 400.00C
RTD-PT 100 (1�C) - -99 to 4000C
Thermocouple K Type - 0000 to 12000C
Thermocouple J Type - 0000 to 7500C
Thermocouple R Type - 0000 to 17500C
Thermocouple S Type - 0000 to 17500C
4 to 20mA DC - Programmable -999 to 9999

Resolution : RTD-PT 100 - 10C or 0.10C
Thermocouple K Type - 10C
Thermocouple J Type - 10C
Thermocouple R Type - 10C
Thermocouple S Type - 10C
4 to 20mA DC - Selectable
Accuracy : Better than �±0.2% of Full Scale
Display : 4 Digit ��½ � High Red L.E.D.
Compensation : Automatic Cold Junction Compensation
Key Features : � Less Complex System due to Single Chip Solution
� Sensor Calibration
One point calibration for RTD-PT100
One point calibration for all Thermocouples
Two point calibration for 4 to 20mA DC
� Input sensor selection through front keyboard
Control Type : On-Off
Time Proportional
Control Logic : Heating or Cooling
Proportional : Proportional Band
Parameter Offset
Cycle Time
Relay Output : 2 nos. of Relay Output
Time Proportional action for first Relay only
Features through : Three Keys on the front panel
Keyboard ,Relay - Set Point, Control Logic, Hysteresis in Temperature, Delay in Time, Time Proportional Parameter � Proportional Band, Offset, Cycle Time, Input Sensor Selection, Range selection for mA Input
Retransmission : Optional 4-20mA Retransmission corresponding to input range
Power Supply : 230 V AC, 50Hz
Size : 96 X 96 X 65mm or 96 x 48 x 110 mm.